When it comes to buying Remote Ir Sensor For Cable Box, you will find many brands selling the same product. And this will make you confused because you will not know which one of these products will meet your needs and desires. That’s why we have compiled the 10 best Remote Ir Sensor For Cable Box considering a lot of factors such as price, quality, durability, customer satisfaction, and many more. Hope you will find the right product for you. Let’s check it now.

Best Remote Ir Sensor For Cable Box

Image
Product Title
Rating

More Details
 in stock
Amazon.com
as of November 12, 2021 12:45 pm

Features

  • AVOID RETURNS: USE ONLY WITH CABLE BOXES WITH AN ACTIVE IR IN PORT LABELED IR IN OR EXT. IR (NOT SERIAL) LOCATED ON THE BACK OF THE CABLE BOX. LOOK UP YOUR MAKE AND MODEL NUMBER USER GUIDE ONLINE. REFER TO THE BACK PANEL PAGE. PLEASE EMAIL OR CALL US IF YOU REQUIRE OUR ASSISTANCE. All units are bench tested and working before leaving the factory. Refer to the trouble shooting section on the original package if need be.
  • Works with VERIZON FiOS, Comcast, Scientific Atlanta Explorer,Cisco,PACE,Motorola,Arris, and DTA Set Top Boxes
  • Will NOT work with SA 4000HDC series,4200/HDC,4240,4250/HDC,8300/HD,8240/8260HDC box, A/V Receivers,TVs or IR Repeater kits
  • REPLACES Cisco/Scientific Atlanta IR Extender 1004648,4029013,4022323
  • 25 Years Experience Manufacturing And Supplying The Cable And Hospitality Industry
 in stock
Amazon.com
as of November 12, 2021 12:45 pm

Features

  • ★ PLUG AND PLAY–Our IR extender cable is easy to install and use. Just plug the 3.5mm jack into an IR input port of the device.
  • ★ UNIVERSAL COMPATIBILITY – Suitable for a broad range of 38-56kHzinfrared devices with an IR input port and remote control such as AV equipment and cable STB boxes.
  • ★ 10FT CABLE – 10 feet LongCable with 3.5mm plug allows you to extend the signal receiver to a suitable position.
  • ★ CLEAN LOOK:Our IR Repeater system is ideal for those who want to conceal their A/V component equipment inside a closet or cabinet for a clean, stylish look.
  • ★ FLEXIBLE+ RISK-FREE PURCHASE–You can now control your home theater, cable boxes, etc. from behind thecabinet, closet or even the other room. If for any reason, you are not 100% satisfied with the product, you can send it back to us, and we will refund your money! DON’T CHECK THE NEXT LISTING! JUST ORDER NOW!!!
 in stock
2 new from $15.99
Free shipping
Amazon.com
as of November 12, 2021 12:45 pm

Features

Part NumberIR1040
ModelIR1040
 in stock
Amazon.com
as of November 12, 2021 12:45 pm

Features

  • STREAMLINE your entertainment center by hiding your cable box, receiver, amp, Roku & other IR controlled devices hidden behind closed doors. No more boxes sitting out on the shelf or leaving cabinet doors open when your watching TV just so you can use your remote control! Give your living space a more refined, more streamlined look! CONTROL 1 to 4 devices using our kit depending on which model you choose. We have models to cover 1, 2 or 4 devices. Choose the model that best suits your setup for
  • COMPATIBLE with all IR controlled devices! We have tested our IR repeater kits with thousands of IR devices to make sure that they work and work well with all frequencies of IR dual band included. No matter the make/model of your devices, as long as they use an IR remote control, our IR extender kit will work with it. Compatible with: Charter, Cisco, DirecTV, Dish Network, Marantz, Motorola, Onkyo, Roku, Scientific Atlanta, Sony, Spectrum, U-Verse, Yamaha, & more! Still uncertain? Contact BAFX!
  • SIMPLE, EASY & COMPACT setup with our all-in-one cable IR repeater / remote control extender kit. Plug the USB into your TV, set top box or other device for power (you may also use a wall adapter - sold separately), then paste the emitter using it's own adhesive over the IR receiver on the device you wish to control. Lastly, place the IR receiver end in the line of sight of your remote control (no further than 28' from remote control) and that's it! You're all set!
  • RESISTANT to interference from stray infrared sources such as plasma TV's & CFL lightbulbs! Worried that your plasma TV or CFL bulbs will cause interference with this IR repeater just like your old IR repeater you bought years ago? Worry no more! With our new plasma resistant technology nearly all of these trouble causing stray IR signals are filtered out! No more randomly changing channels or flashing lights caused by your TV or lightbulbs!
  • EXCELLENT MANUFACTURER WARRANTY from BAFX Products. Even though this is extremely inexpensive, BAFX Products stands behind everything we sell or we won't sell it. Your all-in-one IR extender is covered by our 1 year warranty against manufacturing defects and is super easy & simple to claim should the need arise! We also extend Amazon's normal 30 day return period with our 60 day, no hassle, no questions asked return policy. Miss the return window from Amazon? No problem. Just contact BAFX!
 in stock
Amazon.com
as of November 12, 2021 12:45 pm

Features

  • Please check your device to be sure you have an active 3.5 mini input port labeled "IR IN". Contact us if you have any questions about compatibility before you buy.WORKS ONLY w/CABLE Set Top Boxes (STB).
  • 20 ft range from remote control to IR receiver. High Immunity to ambient light and noise
  • Highly Reliable with high sensitivity for wide range. Works great with our INT-422 Remote
  • 6 ft shielded cable, 3.5 mini plated stereo plug.
  • Works with all Universal Remotes and many cable boxes with an IR IN jack. Be sure to see all of the exceptions listed below.
 in stock
Amazon.com
as of November 12, 2021 12:45 pm

Features

  • High Reliability,3.5mm to IR Target,TRRS(tip-ring-ring-sleeve) 3.5mm plug
  • High Sensitivity, Large Transmission Range
  • High Immunity Against Ambient Light, Power Noise and Electromagetic Interference
  • Our IR Doesn't work for DTA 50,70,170,270. Cisco4640/4642HD,4740/4742HD,CHS435HDC,CHS335HDC,Verizon QIP2500,2708,6416,6200,Motorola VIP12xx,19xx. ALL Onkyo Recivers,harman kardon avr,Arris cable box Frontier ,
  • Our IR works for Directv H25,Telus Cisco IPV6015,CISCO IPV-6016, Cisco IPV5050,EPB fiber box
 in stock
Amazon.com
as of November 12, 2021 12:45 pm

Features

  • {IR REMOTE CONTROL} cable extends the signal to a video source like a Blu-ray player so it can be controlled from your HDTV; Red LED in IR Receiver bulb verifies the signal transmission(Operating range:20-60HZ)
  • {HOME THEATER ACCESSORY} repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an infrared sensor; Route the cable out of sight with a wall mounted HDTV; Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely
  • {SIMPLE INSTALLATION} of this lightweight IR cable; Locate the IR Blaster near the source sensor to repeat the signal to the source; Place the IR Receiver in a convenient location with line of sight of your hand-held remote; IR Tx and Rx cables have adhesive circles on the back for mounting
  • {USB POWERED IR }extension cable has an integrated 6 foot Y-cable to receive 5V USB power; Connect to an HDTV USB port or to a USB wall charger(Tip: Devices that need remote control must be placed in a place where your remote control cannot be directly remotely controlled. Otherwise, the signal from the remote control and the remote control signal after forwarding will be sent to the set-top box at the same time. The signals are not synchronized and will interfere with each other and cause them
  • {UNIVERSAL COMPATIBILITY} with most A/V equipment with infrared sensors (not RF); 180 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote.Remote control signal receiving real-time response to fast forward without delay
 in stock
2 new from $9.99
Free shipping
Amazon.com
as of November 12, 2021 12:45 pm

Features

  • IR remote control cable extends the signal to a video source like a Blu-ray player so it can be controlled from your TV; Blue LED in IR Receiver bulb verifies the signal transmission
  • Home theater accessory repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an IR sensor; Route the infrared remote control extender cable out of sight with a wall mounted TV; Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely
  • Simple installation of this lightweight IR cable; Locate the IR Blaster near the source sensor to repeat the signal to the source; Place the IR Receiver in a convenient location with line of sight of your hand-held remote; IR Tx and Rx cables have adhesive circles on the back for mounting
  • USB powered IR extension cable has an integrated 6 foot Y-cable to receive 5V USB power; USB cable on the IR remote extender cable connects to a TV USB power port or to a USB wall charger
  • Universal compatibility of IR extender cable with most A/V equipment with infrared sensors (not RF); 30 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote
 in stock
Amazon.com
as of November 12, 2021 12:45 pm

Features

  • Package: 1 piece remote control extenders, light-weight, small-size and solid, commonly used when your receiver is hidden away in a cupboard, in a different room, or behind your TV.
  • Connector: Come with a standard universal 3.5mm jack male plug at one end and an IR emitter at the other, 1m cable long enough to position the sensor in anywhere in your house.
  • High Sensitivity: Real time transmission without any delay with its high sensitivity sensor. 38kHz frequency range, compatible with various of electronic products and appliances.
  • Purpose: Used with an IR Repeater kit to control a device, allow you to extend remote control ability to a location that the remote control or IR repeater system block can't reach.
  • Application: Allows you to control A/V component by the existing IR controller, such as set-top box, stereo receiver, car audio system, hard disk player, Satellite TV receiver, CD player, DVD player, Bluray player or other components.
 in stock
2 new from $10.09
Free shipping
Amazon.com
as of November 12, 2021 12:45 pm

Features

  • [Improve Sensitivity]With this IR receiver, the remote control signal could be easier received by the TV or set-top box.
  • [Wide Frequency]This IR receiver can receive wide frequency, which allows users no longer because of remote control receiving frequency mismatch caused by remote control is not sensitive or can not control.
  • [USB Port]Support LCD TV, set-top box and mobile phone USB charger to obtain the power.
  • [Wide Compatibility]This USB IR receiver is suitable for home, hotel and other set-top boxes hidden or shared use of set-top boxes.
  • [Service Guarantee]If you have any questions about this IR Receiver, please feel free to contact us.

Quality is an important factor when buying a product even if the product has distinctive highlights, but its quality is failing and poor then, that product is not suitable and not the right choice. Here, we collected the top 10 Remote Ir Sensor For Cable Box with their features and based on research and other factors, and each one of them has high quality and buyers shared a high level of satisfaction through their use of these products.

Thank you for choosing to look through our article. Don’t forget to click the product link on Amazon so you can have the product you love in the shortest amount of time. Hopefully, you can find the product that best suits you.

Duckshockeyshop.com is converted into one of the major platforms for buyers over the internet. It is continually growing and looking forward to being the most ingenious platform in this industry. We absolutely assemble and make an individualistic option when choosing products. We take many factors and features into consideration.

Duckshockeyshop.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees (at no cost to you) by linking to Amazon.com. Thank you for using our links.